Integrity Pro Washers Team
Professional pressure washing and soft washing specialists serving San Diego County.
Last updated: 2026-06-02
What we found on 13 Pacific Beach patios last month
We pressure washed 13 Pacific Beach patios in May 2026, mostly between Grand Avenue and Garnet. Beach sand and salt air drove most of the staining, not algae. We dropped from 3,200 PSI to 1,800 PSI on weathered concrete to avoid pitting, and finished each job in 90 to 150 minutes for 250 to 400 square feet.
Last updated: June 2026
Pacific Beach is its own beast. The sand gets everywhere. It tracks across pavers, lodges in concrete pores, and grinds at the surface every time someone walks across it. By the time a patio looks dirty in PB, the dirt has usually been there a while.
What 13 jobs looked like
Eleven of the patios were poured concrete. Two were travertine. Square footage ranged from 180 to 520. Average ticket landed around $285. The oldest concrete we touched was poured in 1971 on a Diamond Street bungalow. The newest was a 2022 ADU pour off Reed Avenue.
The travertine jobs took longer. We use a flat surface cleaner at 1,200 PSI and a soft-bristle pass on travertine. Run too hot and the calcium leaches.
Why we drop the pressure on old concrete
Older Pacific Beach concrete has aggregate close to the surface. Hit it with 3,200 PSI through a zero-degree tip and you will expose the rocks. We saw this twice last spring on jobs we inherited from another company. Owners thought their patios were just dirty. They were actually pitted from prior cleanings.
Our default for weathered patio concrete is 1,800 PSI through a 25-degree tip on a 12-inch surface cleaner. It cleans evenly without etching.
Salt air does the slow damage
Six blocks off the boardwalk and you can still taste the ocean. Salt air pulls moisture into stucco, concrete, and metal hardware. On patios, it shows up as a chalky film that comes back fast if you skip the rinse step.
We finish every coastal job with a freshwater rinse at low PSI. Sounds basic. A lot of crews skip it.
How much does pressure washing a Pacific Beach patio cost?
For a 300 square foot residential patio, we quote $225 to $375 in Pacific Beach. Travertine and pavers run higher because of the technique change. Jobs that include the adjacent walkway or pool deck usually come in around $450.
Pressure Washing vs Soft Washing for Pacific Beach Patios
| Surface | Pressure Washing | Soft Washing |
|---|---|---|
| Old concrete patio | 1,800 PSI surface cleaner | Not needed |
| Travertine | 1,200 PSI low-flow | Better for stained grout |
| Stucco patio walls | Avoid | Soft wash at 200 PSI |
| Wood deck adjacent | Avoid above 800 PSI | Surfactant wash |
If you book a patio job and you have stucco walls or a wood pergola in the same footprint, we will quote both. Mixing methods on the same visit saves a trip charge.
Two failures worth mentioning
On a Reed Avenue job, we tried to remove a black tire stain at 2,400 PSI. It lifted, but it took two passes and left a slight halo. Next time we will hit it with a degreaser pre-treatment first.
On a 1971 Diamond Street pour, the homeowner asked us to take it back to white. We told them no. The aggregate was 1/8 inch from the surface in three spots. Aggressive cleaning would have wrecked it. We charged less and left it with a uniform gray finish instead.
When the salt air comes back
Most Pacific Beach patios need a wash every 9 to 12 months. Anything within four blocks of the boardwalk pulls toward the 9-month side. Inland of Ingraham Street can usually stretch to 14 months.
If you saw us on your block in May and want yours on the list for next spring, that booking opens in February. Our Pacific Beach service page has the full scope. Our pressure washing services page covers the rest of the city.